User Manual

69
EN
Appendix
Camera care
Exterior
Wipe gently with a soft cloth. If the camera is very
dirty, soak the cloth in mild soapy water and wring
well. Wipe the camera with the damp cloth and
then dry it with a dry cloth. If you have used the
camera at the beach, use a cloth soaked in clean
water and wrung well.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial blower,
then wipe gently with a lens cleaner.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
Mold may form on the lens surface if the lens is
left dirty.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
Storage
When storing the camera for extended periods,
remove the battery, USB-AC adapter and card, and
keep in a cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
Avoid leaving the camera in places where
chemical products are handled since this may
result in corrosion.
Using a separately sold USB-AC
adapter
The USB-AC adapter F-3AC (sold separately) can
be used with this camera. Do not use any USB-AC
adapter other than the dedicated one. When using
F-3AC, be sure to use the USB cable included with
this camera.
Do not use any other USB-AC adapter with this
camera.
Using a separately sold
charger
A charger (UC-50: sold separately) can be used to
charge the battery.