Owner's manual

p (Panorama mode)

You can shoot and combine multiple images to create an image with a wide

angle of view (panoramic image).

Rotate the mode dial to p.

Press the A button to go to the function menu. Use HI to

select a sub mode and press the A button at the end.

Submenu Application

Auto

Panorama images are automatically combined just by

swinging the camera in the shooting direction.

Manual

Three frames are taken and combined by the camera.

The user composes the shots using the guide frame

and manually releases the shutter.

• Move the camera as if rotating it around a vertical axis through the center

of the lens to take better panorama images.

Taking pictures with [Auto]

1 Select [Auto] in the submenu,

and press G. Use HI to select

the angle of view (STD:180°,

FULL:360°) and then press the

A button.

2 Point the camera to the start

position.

3 Press the shutter button to begin

shooting.

AUTO

FULL

Cancel

Save

Guide

4 Start panning. When the arrow reaches the end of the guide, recording ends

automatically.

• The camera automatically processes the images and the combined

panorama image is displayed.

• To stop shooting in the middle, press the shutter button or A button. If

the camera pauses for a while, shooting automatically finishes.

• If the message [Image was not created.] is displayed, shoot again.

• To cancel the panorama function, press the  button.