Owner's manual

34 EN
Self timer
Sets the time after the shutter button is pressed until the picture is taken.
1
Press the jY button (G) to display the direct menu.
2
Select [Y12], [Y2] or [YC] using HI and press the Q
button.
Y12
Self-timer
12 SEC
Press the shutter button halfway to focus, the rest of
the way down to start the timer. First, the self-timer
lamp lights up for approximately 10 seconds, then it
blinks for approximately 2 seconds and the picture
is taken.
Y2
Self-timer
2 SEC
Press the shutter button halfway to focus, the rest of
the way down to start the timer. The self-timer lamp
blinks for approximately 2 seconds, and then the
picture is taken.
YC
Custom
Self-timer
After selecting this mode, press the  button to
set “the number of frames, the time from pressing
the shutter button until the picture is taken, and the
interval time”. Pictures are taken by these setting.
• To cancel the activated self-timer, press the

button.
• Self timer is not canceled automatically after shooting.