User Manual

48 EN
Installing Software
Use OLYMPUS Viewer 3 to copy pictures from the camera to the computer,
where they can be browsed, edited, and organized.
 Windows
1
Insert the supplied CD in a CD-ROM drive.
• An Autorun dialog will be displayed. Click
“OLYMPUS Setup” to display the “Setup”
dialog.
• If the “Setup” dialog is not displayed,
open the CD-ROM (OLYMPUS Setup)
in Windows Explorer and double-click
“LAUNCHER.EXE”.
• If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2
Follow the on-screen instructions on your computer.
3
Register your Olympus product.
• Click the “Registration” button and follow the on-screen instructions.
4
Install OLYMPUS Viewer 3.
• Check the system requirements before beginning installation.
• Click the “OLYMPUS Viewer 3” button and follow the on-screen
instructions to install the software.
Operating System
Windows Vista SP2 / Windows 7 SP1 / Windows 8 /
Windows 8.1 / Windows 10
Processor
Core 2 Duo 2.13 GHz or better
RAM 2 GB or more
Free Hard Drive Space
3 GB or more
Monitor Settings
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000 colors
recommended)
• See online help for information on using the software.
• The table above gives the minimum system requirements. Higher
specifications may be required at some settings. See the software “Readme”
file for more information.