User Manual

18 EN
Reading a histogram
The green section shows luminance
distribution within the screen’s center.
If the peak fills too much
of the frame, the image
will appear mostly black.
If the peak fills too much of
the frame, the image will
appear mostly white.
Switching the displays
Press the INFO button to cycle through the displays as follows: Basic
Information*
1
, Image Only, Histogram Display (Custom1), Attitude Indicator
(Custom2).
• You can change Custom1 and Custom2 settings. g [G/Info Settings] >
[LV-INFO] (P. 62)
• Hold the INFO button and rotate the control dial to rotate the shooting
information display.
*1 Not displayed in A mode (movie mode) unless recording is in progress.
The Attitude Indicator
The attitude indicator shows the amount of camera tilt. The vertical bar
shows pitch, and the horizontal bar shows roll.
• The indicator is intended as a guide only.
• Error in the display can be corrected via calibration (P. 69).
No. Name
w
Custom mode
x
LOG icon/warning
y
GPS icon
z
Metering
A
o
/
Y
/Pro Capture shooting
B
Flash Compensation
C
Flash mode
D
Image stabilization
E
Battery check