User Manual
69
EN
69
EN
For the operation method, refer to (P. 50).
Calibrating the attitude indicator H [Level Adjust]
Submenu 2 Application
Reset Resets adjusted values to the default settings.
Adjust Sets the current camera orientation as the 0 position.
Choosing the sleep delay H [Sleep]
Submenu 2 Application
Off Disable sleep (energy saving) mode.
1 min/3 min/
5 min
The camera will enter sleep (energy saving) mode if no
operations are performed for the selected period.
• The camera can be reactivated by pressing the shutter button
halfway.
Using an Eye-Fi card H [Eye-Fi]
Submenu 2 Application
On Enable wireless on Eye-Fi cards.
Off Disable wireless on Eye-Fi cards.
• The setting can be changed when an Eye-Fi card is inserted.
• When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully,
and comply with the instructions.
• Use the Eye-Fi card in compliance with the laws and regulations of the
country where the camera is used.
• In locations such as on an airplane, where the Eye-Fi communication is
prohibited, remove the Eye-Fi card from the camera, or set [Eye-Fi] to [Off].
• This camera does not support the Eye-Fi card’s Endless mode.
Checking the certification marks H [Certification]
Part of the certification mark (for safety standards, etc.) is displayed.