User Manual

Menu functions (Shooting menu)
4
85 EN
• If any of still pictures are not recorded correctly, the time lapse movie will not be
generated.
• If there is insuffi cient space on the card, the time lapse movie will not be recorded.
• Using any of the controls or performing any of the operations listed below ends time-lapse
shooting:
the mode dial, MENU button, the q button, connecting a USB cable, turning the
camera off
• Interval-timer photography will end if the battery runs low. Check that the battery is
charged before shooting; if you will be shooting for an extended period, use the USB-AC
adapter. If you are using the USB-AC adapter, insert the battery in the camera and select
[Charge] in the dialog displayed after the USB cable is connected. Once the monitor has
turned off, you can press the ON/OFF button to turn the monitor on again and continue to
take pictures while charging is in progress.
• Movies recorded with [4K] selected for [Movie Settings] > [Movie Resolution] may not
display on some computer systems. More information is available on the OLYMPUS
website.
Varying focus little-by-little over a series of pictures (Focus BKT)
Each time the shutter button is pressed, the camera will automatically vary focus over
a series of 10, 20, or 30 shots.
1
Highlight [Focus BKT] in X Shooting Menu 2 and press the Q button.
2
Highlight [On] and press the I.
3
Adjust the following settings and press the Q button.
Start Waiting Time
0 to 30 sec
Select the length of time the camera waits
before shooting starts.
Set number of shots
10/20/30
Select the number of frames in the bracketing
sequence.
Set focus differential
Narrow/Normal/
Wide
Select the amount focus changes with each
shot.
4
Press the shutter button halfway down to focus.
• If the focus indicator blinks, the camera is not in focus.
5
Press the shutter button all the way down to shoot.
• The camera takes the number of shots selected for [Set number of shots] while varying
focus with each shot. The camera will take pictures at, and at distances in front of and
behind, the focus distance selected when the shutter button is pressed halfway.
• The t indicator turns green during bracketing.
• Shooting ends when focus reaches ) (infi nity).
• AF target selection is fi xed at [I] (single target).
• Exposure and white balance are fi xed at the values for the fi rst shot in each series.