User Manual

ManualsBrandsOlympus ManualsCamera & PhotoOlympus PEN-F (Body-Only) (Black)

Shooting

Letting the camera choose aperture and shutter speed

(P program mode)

P mode is a shooting mode where the camera automatically sets the optimal aperture

and shutter speed according to subject brightness. Set the mode dial to P.

250250 F5.6

01:02:0301:02:03

3838

ISO-A

200

S-IS AUTO

Wi-Fi

FHD

Shooting mode

Shutter speed

Aperture value

• The shutter speed and aperture selected by the camera are displayed.

• You can use the exposure compensation dial to select exposure compensation.

• Use the front or rear dial for program shift.

• The shutter speed and aperture displays will blink if the camera is unable to achieve

correct exposure.

Warning display

example (blinking)

Status Action

60"

F2.8

The subject is too

dark.

• Use the ﬂ ash.

8000

F22

The subject is too

bright.

• The metered range of the camera is

exceeded. A commercially available ND

ﬁ lter (for adjusting the amount of light) is

required.

• The aperture value at the moment when its indication blinks varies with the lens type and

focal length of the lens.

• When using a ﬁ xed [ISO] setting, change the setting. g [ISO] (P. 45 )

Program shift (%)

In mode P, you can choose different combinations of

aperture value and shutter speed without altering exposure.

“s” is displayed next to the shooting mode when the front

or rear dial is rotated to enable program shift. To cancel

program shift, rotate the dial until “s” is no longer displayed.

• Program shift is not available when a ﬂ ash is used.