User Manual

74 EN
Shooting
2
Assigning functions to buttons (Button Function)
At default settings, the buttons are assigned the following functions:
Button Default Button Default
U button
AEL/AFL
I button
#
V button
u
G button
j/Y
R button R REC
n button
Direct Function
a button al button
AF Stop
z button
z
To change the function assigned to a button, follow the steps below.
1
Press the Q button to display the LV super control
panel.
2
Tap button function and press the Q button.
3
Use the rear dial to select a button.
250250 F5.6
P
i
Function
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
U
AEL/AFL
Button function
4
Rotate the front dial to select a display, then use rear dial to highlight the
desired option and press the Q button.
• The options available vary from button to button.
• This option is equivalent to the cCustom Menu S.
F (Exposure
compensation)
Adjust exposure compensation.
• Exposure compensation can be adjusted when [
w
] is
selected for [
F
Dial Function].
k ISO / j WB
Adjust ISO sensitivity using the front dial and white balance
using the rear dial.
k WB / j ISO
Adjust white balance using the front dial and ISO sensitivity
using the rear dial.
AEL/AFL AE lock or AF lock. The function changes according to the
[AEL/AFL] setting. When AEL is selected, press the button
once to lock the exposure and display u on the monitor.
Press the button again to cancel the lock.
R REC
Press the button to record a movie.
z (Preview)
Aperture is stopped down to the selected value while the
button is pressed. If [On] is selected for [zLock] in Custom
Menu, the aperture is held at the selected value even when
releasing the button.
k (One-touch white
balance)
The camera measures white balance when the button is
pressed (P. 46 ).
P (AF area)
Choose the AF target.
P Home
Pressing the button selects the AF target position saved with
[P Set Home] (P. 104 ). Press the button again to return to
AF target mode. If the camera is turned off when the home
position is selected, the home position will be reset.