User Manual

6
Troubleshooting
31
EN
Troubleshooting
Problem
Alarm
message
Possible cause Solution
The display is
blank.
-
The batteries are not inserted
properly.
Check that the positive and
negative terminals of the
batteries are placed correctly
(☞P. 6).
LO
The remaining battery power
is low.
Replace the batteries (☞P. 6).
- The power is OFF.
Turn the power ON (☞P. 7).
Unable to operate
the voice recorder.
LO
The remaining battery power
is low.
Replace the batteries (☞P. 6).
- The power is OFF.
Turn the power ON (☞P. 7).
HOLD
The voice recorder is in HOLD
mode.
Release HOLD mode (☞ P. 10).
Unable to record.
FULL There is no remaining memory.
Erase unnecessary files
(☞P. 24).
FULL
The maximum number of
recordable files (199) has been
reached.
Erase unnecessary files
(☞P. 24).
Playback is
inaudible.
-
The earphones are connected to
the q jack.
To output the playback through
the built-in speaker, disconnect
the earphones.
- The volume is set to [00].
Adjust the volume (☞ P.15).
The recording is
too quiet.
-
The output level of the
connected external device may
be too low.
Adjust the output level of the
external device.
Missing audio file.
NO FILE
The file was recorded in a
different folder.
Select another folder.
Other information