User manual

126
EN
8
Troubleshooting
Troubleshooting
Symptom Probable cause Action
Nothing appears on
the display
The battery is not loaded properly
Verify that the battery's polarities + and - are correct
(
☞
P. 22).
Battery power is getting low.
Charge the battery or replace with a new battery
(
☞
P. 2 2).
The power is off. Turn the power on (
☞
P. 2 5).
Won't start
Battery power is getting low.
Charge the battery or replace with a new battery
(
☞
P. 22).
The power is off. Turn the power on (
☞
P. 2 5).
The recorder is in HOLD mode. Release the recorder from HOLD (
☞
P. 26).
Unable to record
No remaining memory. Erase unnecessary files (
☞
P. 50 ).
The maximum number of files
has been reached.
Change to any other folder (
☞
P. 3 4).
Unable to record
through the external
microphone
An external microphone that
must be supported by plug-in
power is connected but [Plug-
in Power] is set to [Off].
Set [Plug-in Power] to [On] when an
external microphone that must be
supported by plug-in power is connected
(
☞
P.75).
No playback sound
heard
The headphone is connected. Unplug the headphone to use the internal speaker.
The volume level is set to [
0
]. Adjust the volume level (
☞
P. 4 6).
Recording level too
low
The recording level has not
been adjusted.
Adjust the recording level and then try recording once
more (
☞
P. 82).
The microphone sensitivity is too
low.
Set [Mic Sense] to [HI] or [MID] and then try recording
once more (
☞
P. 81).
This could potentially be because
the output level for the connected
external devices is too low.
If adjusting the recording level does not help you
get a clear recording, adjust the output level for the
connected devices.
Recording level too
high
The recording level has not
been adjusted.
Adjust the recording level and then try
recording once more (
☞
P. 37 ).
This could potentially be
because the recording level
and output level for connected
external devices is too high.
If you cannot record clearly even after adjusting the
recording level, then adjust the output level for the
connected devices (
☞
P. 37 ).
Files are not recorded
in stereo
The connected external
microphone is monaural.
When recording while an external monaural
microphone is connected, the sound will only be
recorded by the L-channel.