User manual
23
EN
2
Power Supply
Power Supply
▌
Connecting the recorder to a PC
with the USB cable for recharge
Notes
•
When the unit's [USB Class] is set to [Composite]
with the [USB setting], charging will not start
(
☞
P. 110).
•
Stop or turn off the recorder before connecting
the USB cable.
1
Start up the PC.
2
Connect the USB cable to the USB
port on the PC.
3
Connect the USB cable to the USB
terminal of the recorder.
•
The PEAK display lamp (R) lights up in
orange and recharging starts.
Battery indicator
The battery indicator on the display
changes as described below according to
the remaining battery level.
•
When [
] appears on the display,
recharge the battery as soon as possible.
When the battery runs out, [
] and
[Battery low] are displayed and opera-
tion stops.
•
The battery indicator repeatedly appears
during recharge.