User guide

20
EN
Using the function menu
1
Use H of the arrow pad to display the
function menu.
2
Use FG of the arrow pad to select the
function to be set.
3
Use HI of the arrow pad to select the
setting value, and then press the A button to
enter the setting.
Example: Self-timer
PP
1212
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
MENUMENU
16 M
22
Y
Off
Flash
*1, 2
Sets the fl ash fi ring method.
_
Flash Auto
The fl ash fi res automatically in low-light or backlight conditions.
!
Redeye
Pre-fl ashes are emitted to reduce the occurrence of red eye in your photos.
#
Fill In
The fl ash fi res regardless of the available light.
$
Flash Off
The fl ash does not fi re.
Macro Sets the function for shooting subjects at close distances.
`
Off
Macro mode is deactivated.
&
Macro
You can shoot the image at a range as close as 20 cm/7.9 in. (W) to 60 cm/23.6 in. (T).
a
Super Macro
This enables shooting as close as 5 cm (2 in.) to the subject.
Self-timer Sets the time after the shutter button is pressed until the picture is taken.
b
Y Off
The self-timer is deactivated.
c
Y 12 sec
The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and
then the picture is taken.
d
Y 2 sec
The self-timer lamp blinks for approx. 2 seconds, then the picture is taken.