Specifications

22
3
EN
Playback
Playback
Setting an index mark or a temp
mark
If index marks and temp marks are placed,
you can quickly find a location you want to
listen to in fast forward and fast rewind and
when cuing a file. Index marks cannot be
placed on files created on machines other
than this recorder, but temp marks can be
placed instead to temporarily remember
desired locations.
1 While the recorder is in recording
mode or playback mode, press
the FOLDER/INDEX button.
• Even after an index or temp mark is
placed, recording or playback will
continue so you can place index or
temp marks in other locations in a
similar manner.
3 Press the ` OK button.
• Even if playback is stopped, the
changed playback speed will be
retained. The next playback will be at
that speed.
About the limits of fast playback
Normal operation may not be available
depending on the sampling frequency
and the bit rate of the file to be played
back. In such a case, reduce the speed of
the fast playback.
Notes
• As in normal playback mode, you can
stop playback, cue a file, or insert an
index or temp mark in slow playback and
fast playback modes as well.
• The slow playback or fast playback is
available even if [ Voice Filter ] is set
( ☞ P. 33).
• When using the slow playback or
fast playback function, the following
functions are not available.
• [ Noise Cancel ] ( ☞ P.33) (VN-713PC only)