User Manual

Maintenance
22
Page
3-3 Overview Image Area Settings
When acquiring the image by VS120, acquire the overview image (2x magnification) of
the entire slide glass specimen first, and then acquire the image in the specified area by
the specified magnification.
Though the area to acquire the overview image has been preset at setup time, you can
set the area and save the overview image by yourself.
3-3-1 Overview Image Area Settings
1. Set the slide glass specimen on the stage according to procedures described in
Chapter 2-3.
2. Click [Scan] tab on the upper-right of the VS-ASW software screen. [Stage
Navigator] tool window will be displayed on the lower-right of the screen.
3. Click [Define Overview Area] in the tool bar of [Stage Navigator] tool window.
[Define Overview Area] dialog box will be displayed.
[Define Overview Area]
[Scan] tab
[Stage Navigator] tool window