User Manual
30 •31
4.•Calibration•and•Warranty
CALIBRATION
Each device must be calibrated annually. The calibration
date appears when your OCIGO starts up.
The purpose of calibration is to verify the relevance of
the results reported by the breathalyzer, by performing
a series of tests under the supervision of an accredited
laboratory.
(M[LY[OLZWLJPÄLKKH[LPM`V\KVUV[YLJHSPIYH[L[OL
OCIGO, the reliability and accuracy of the results are
no longer assured. However, the device will continue to
operate.
Calibration should only be carried out by competent
and authorized persons.
WARRANTY
Under the legal warranty of conformity, OLYTHE
guarantees the product against any manufacturing
defect that may occur during normal use for 2 (two)
years from the date of delivery.
The warranty does not cover damage or defects
resulting from use which is not in accordance with these
instructions, or any repairs or dismantling carried out or
H[[LTW[LKI`WLYZVUZUV[HɉSPH[LK^P[O63@;/,
CONTACTS
For any information regarding calibration, warranty or
technical questions about your product, please contact
V\Y[LJOUPJHSZ\WWVY[ZLLJVU[HJ[KL[HPSZVU[OLIHJRVM
these instructions)
•«Invalid•breath•»•message•and•vibrates•twice•when•
you•blow•into•the•device.
;VTHRLHJVYYLJ[TLHZ\YLTLU[[OLIYLH[OK\YH[PVUT\Z[
ILZ\ɉJPLU[[VYLHJO[OLTPUPT\TYLX\PYLKHPY]VS\TL0[
is also possible that you may have blown too hard. The
application can guide you while you blow. Remember
to attach a new mouthpiece beforehand to ensure the
reliability of the new test.
“Wait•»•message•when•OCIGO•sustains•a•sudden•
movement.
In order to provide a correct measurement, the OCIGO
TLHZ\YLTLU[Z`Z[LTULLKZ[VILRLW[Z[PSS;OLYLMVYL
avoid violent jolts and sudden movements before
blowing.
OCIGO•does•not•recharge•while•plugged•in
OCIGO can only be recharged when the ambient
temperature is between 0°C and +40°C. Please wait until
the temperature drops below 40°C.
5.•Troubleshooting
ENGLISH