Safety Instructions

16
Press ANTENNA SETTINGS. First select
ANTENNA SWITCH (No switch,
Standard). Use left or right arrows. If
you select some switch, 10 ports for
different antennas displays. Generally
all of antennas are allowed in every
band (green squares). To disable some
square select port (up/down), touch
SET for antenna name and then select
band (left/right). Press SET.
Four types of antennas for four
different bands were disabled.
Black square means disabled
combination.
Press EXIT to go back to SETTINGS
menu
BCD code (4 bits) is used for automatic antenna and BPF switching (see Antenna/BPF connector on
the Control panel (rear side of the PA). See section 7.9 for Control and ANT/BPF connectors pin-
out.
Next SETTINGS position is for choosing
display parameters. First choose the
background color. Scroll on it and
choose the color (left/right).
Press SAVE twice, then scroll to OWN
CALL.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.