Safety Instructions

18
Press NETWORK SETTING and then
press ENTER.
Here the user has the option to set IP
Address, Network mask, Default
gateway, Port number.
User can enable or disable IP
parameter setting via LAN connection.
Next lines are for EBS (Electronic Bias
Setting) ON/OFF and for EBS level
selection.
We recommend EBS ON. See next
comment for more details.
Electronic Bias Settings (EBS) is a significant feature of this power amplifier. It automatically allows lower
plate current after pressing the PTT, regardless of whether operating CW or SSB mode, when no RF signal
is present at the input. At the moment an RF signal is applied, the bias will automatically change to its
working value.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.