Safety Instructions

23
A new button is visible – SET Umain.
Press it.
Type in the actual setting of the primary
voltage tap and press ENT.
Press EXIT twice to go back to the Menu
display.
This is the actual physical setting of the primary voltage tap. It is just information for the
processor, which protects the permitted limits ( up or down) for a given value of the primary
voltage (protection circuit).
Pressing MEAS displays this screen.
Instantaneous values of the basic amplifier
parameters are displayed.
NOTE: You can FREEZE the screen and/or
allow constant monitoring.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.