Safety Instructions

25
Now we are in the SERVICE settings mode.
Scroll to selected line and press SHOW or
SET (depending on the line).
We selected last 20 FAULTS to show.
Press EXIT
Go to SET EBS1 AUTO and press SET.
PA will automatically set 20mA on the
front and back tube separately. When
finished successfully, you will see SET
EBS1 AUTO OK on the screen
You can try to do this manually, too.
Scroll to SET EBS1 MANUAL and press
SET.
Use up/down buttons to set 20mA or as
close as possible value and press SAVE.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.