Manual

PRECISION ABRASIVE WATERJET ACCESSORIES
Accessory Specifications
CHILLER
OMAX
®
Chiller Systems
Chiller
Improve performance with the OMAX Chiller.
In the event that water temperature exceeds 60°F
on a seasonal or regular basis, shortened pump
seal life can occur. The Chiller cools water
supply for the pump which improves seal life.
Depending on the rating of the Chiller and
ambient conditions, the water temperature can
be lowered by 20° F to 40° F (11° C to 22° C).
Water from the OMAX system’s charge pump is
sent through the Chiller and returns to the pump.
A portion of the water is recirculated to the
waterjet’s internal charge tank to minimize usage.
Standard Features
• 12,000 BTU/hr Chillers are available
in 3 phase 460 VAC (4 amps)
• 24,000 BTU/hr Chillers are available
in 3 phase 460 VAC (7 amps)
• 36,000 BTU/hr Chillers are available
in 3 phase 230/380/460 VAC
(18/9/9 amps)
• Designed for 50° F to 125° F ambient
temperature (10° C to 52° C)
• All wet-end components are made
from non-ferrous material
• All connecting hardware supplied
by OMAX
• Digital temperature readout
• Refrigerant Type: R-22
Benefits
• Control the inlet water temperature
entering your pump equipment
• Improve your pump’s seal life
• Reduce pump rebuilds and machine
downtime
Requirements
• Inlet water fed to the OMAX pump is
required to be 60° F (16° C). If inlet
water temperature is above 60° F,
a Chiller will cool the water for the
pump.
C o r p o r a t i o n
Connect and follow OMAX for the latest news
in waterjet technology.