Owner's manual

ACCESSORIES
LAMINAR FILTER
Made in the USAWWW.OMAX.COM
FEATURES
• Available for both OMAX JetMachining® Centers and MAXIEM JetCutting
Centers
• Standard Catcher Tank hose ts directly to the Laminar Filter
• Modules of angled plates create laminar water ow to
lter particles
• Submersible sediment pump with ground fault circuit interrupter
moves sediment laden water to a Dump Hopper or Catcher Tank
• Custom rake included for pulling sediment to pump during cleaning
OMAX Laminar Filter
This settling tank efciently cleans overow water from the Catcher Tank for required recycling through a Closed Loop System
(CLS) or for environmental disposal. When water enters the OMAX Laminar Filter, an ideal gravitational ltering process begins in
the unit. The accessory contains angled plates that organize the water ow in a slow moving laminar manner. Small, lightweight
particles fall a short distance before contacting the plates, where they stick together and are trapped. Clean water exits to a CLS
or a disposal drain while sediment falls to the bottom of the tank, where routine removal is made easy with the integrated sediment
pump system.
BENEFITS
• Water returning to a Closed Loop System is cleaner, extending the
life of the CLS lter
• Laminar water ow efciently removes ner particles from water
• Easier to clean unlike other settling tanks or bag inserts
• Offers a means to comply with regional waste disposal regulations
• Low operating cost: no expensive lters or bags to replace