AP40WA 40cm Pedestal Fan Instruction Manual Downloaded from www.Manualslib.
omega altise Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Read all instructions. Disconnect the power plug before dismantling, assembling or before cleaning. Avoid touching mobile parts of the fan. Make sure the fan is on a dry and even surface. Never insert fingers, pencils or any other objects through the guards whenever the power plug is connected, especially while running.
omega altise Assembly Instructions Your pedestal fan has been boxed unassembled to minimise packaging waste. Each part is designed to fit together and be disassembled easily for cleaning or storage. Assemble the base to the support pole using the fasteners provided. Loosen the height adjustment ring and extend the support pole to your desired height. Put the base cover over the cross base.
omega altise ASSEMBLY OF YOUR PEDESTAL FAN FOR ROUND BASE Loosen the height adjustment ring and extend the support pole. Initially the support pole will be held tightly in place. If necessary, use a pair of pliers to grasp the support pole and pull it into position. To assemble the safety grille and blade assembly, remove the spinner (by turning it clockwise), then the locking nut (by turning it anticlockwise) from the motor spindle.
omega altise Care and Maintenance 1. Always disconnect the cord from the electrical outlet when cleaning your fan. 2. Light accumulated dust may be removed from the fan with a soft cloth or vacuum cleaner using the dusting brush attachment. 3. Wipe the exterior surfaces of the fan occasionally with a cloth moistened (not dripping wet) with a mild soap solution. Dry the case thoroughly with a soft dry cloth before operating the fan. 4.
