User Manual

• If inner water tank is full, “W.F” indicator will flashed on the screen , 8 seconds
later machine enter into standby mode, buzzer shouts , compressor stops and
all keys is invalid till machine recovers to be normal .
• Pull out the plug to drain out water, power off the machine and restart it , the
machine will runs normally .
Maintenance
Note: in order to avoid electric shocks, please turn off at the control panel,
switch off the power point then unplug the appliance before cleaning
Cleaning
• Please switch off at the control panel, then at the power point then unplug before
cleaning .
• Use soft semi-dry cloth to clean the machine. Don’t use chemical agents, such
as benzene, alcohol, gasoline etc ; otherwise the machine surface can be
damaged.
• Use only a moist cloth not a wet or dripping as if water enters the control panel
or the machine it will cause damage.
Filter
• Clean the filters every two weeks, if filters are blocked by dust, machine
efficiency will be reduced .
• Clean the filters in warm water with neutral detergent, then dry the cleaned filters
on a shady place.
Note: Don’t run the machine without filters.