User Manual

Place the machine on flat and dry ground, and keep at least 30 cm from walls etc
(figure 1)
FIGURE 1
Installation
• Spin adapter into exhaust pipe first, then spin the exhaust pipe into exhaust
connector (counter-clockwise) (figure 2)
• Put adapter into window seal plate, adjust window open width in order seal
plate match window well, and the length of seal plate is adjustable.
FIGURE 2
FI
G
Installation Errors
• Free access of exhaust pipe is important, If air is not taken out it will affect
performance of the appliance.
• Avoid sharp bends in the exhaust-pipe (figure 3)
Make sure air in exhaust pipe can run smoothly (figure 4)