User Manual

Timer mode
• Under standby mode, press “TIMER” to setup the power-on time, press
“UP” and “DOWN” to adjust the timer (from 1 to 24). Timer indicator turns on.
• Under power-on mode, press “TIMER” to setup power-off timer. Press “UP”
and “DOWN” to adjust the timer (from 1 to 24). Timer indicator turns on.
Dehumidifying mode
• Press “MODE” to select dehumidifying mode, dehumidifying mode indicator
turns on .
• Under dehumidifying mode, timer and sleeping function cannot be setup,
and fan speed is low.
Sleep mode
• Press key “SLEEP” enter into sleeping mode, default value of fan speed is
low.
• When sleeping mode turns on, under cooling mode, one hour later,
temperature will go up 1℃ from setting temperature , and then keep the
same ; under heating mode, one hour later, temperature will go down 1℃
from setting temperature , and then keep the same .
• Sleep mode is invalid under dehumidifying and fan mode. Under water full,
machine standby and mode conversion, sleeping mode will be cancelled .
Compressor protection
If turned on and off or on at start up it takes 3 minutes for the compressor to
start..
Water Drainage
This machine has a auto-water-evaporating system. Condensed-water
cycle is used to cool down the condenser, which not only improves
cooling efficiency, but also saves energy.