READ AND SAVE THESE INSTRUCTIONS OPERATION, MAINTENANCE AND SAFETY INSTRUCTIONS OP125 Due to ongoing product development, images shown are subject to change without warning
Product Overview GENERAL SPECIFICATION DETAILED SPECIFICATION Parts & Assembly CARTON CONTENTS ASSEMBLY INSTRUCTIONS Useful Information CLEANING OSCILLATION REMOTE STORAGE
Important Safety Instructions IMPORTANT Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage.
OP125B - Blue OP125BLK - Black MODEL: OP125M - Mint OP125W - White Rated Voltage: 24VDC Rate Power Input: 30w Product Dimensions - Base (mm): 1255h x 700w x 700d Product Dimensions - Head (mm): 1255h x 325w x 215d Weight: Setting Position (Speed) dB(A) Meters per second Max fan flow rate 5kg 5-6 High Range 3-4 Mid Range 1-2 Low Range 71.1 64.7 61.1 5.8 4.5 3.9 16.83 13.01 11.39 Tested according to clause 9 of IEC60879:1986 (corr.
1) Fan Assembly x 1pc 2) Base x 1pc 3) Screw M4*30 x 3pcs 4) AC/DC Adapter x 1pc 5) Remote Control x 1pc 6) Remote Control Bracket x 1pc 7) Screw Driver x 1pc 8) CR2032 Battery STEP 1: ATTACH BASE TO STAND
4.1 ASSEMBLY INSTRUCTIONS CONT. STEP 2: INSERT AC/DC ADAPTER STEP 3: SYNC REMOTE TO FAN 1. Turn on the fan 2. 2. Remove protective film strip from remote to activate battery • If no battery, please insert a new one (CR2032) 3.
Cleaning should be performed periodically to ensure the longevity of your new fan. • Ensure the fan is disconnected from the power • Take a clean microfiber cloth • Wipe rear and front guard until clean Oscillation can be set by the remote control, refer to step 3 for operation instructions.
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Omega Altise reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly - recycle where facilities are available. A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 795 572 In New Zealand: (09) 415 6000 www.omegaaltise.com.
