User Manual

A division of Shriro Australia Pty Ltd
104 Vanessa St Kingsgrove NSW2208
In Australia: 1300 795 572
In New Zealand: [phone]
www.omegaaltise.com
OMEGA ALTISE
Place the fan in a flat and stable surface. Make sure the Off/Speed knob is in
Off position (“0”) then plug it into a correct socket.
To select the desired speed rotate the Off/Speed knob; the desired speed
must be aligned at the reference dot place on the motor.
0 = off
1 =low speed
2 = medium speed
3 = high speed
① = low speed with vertical oscillation
② = medium speed with vertical oscillation
③ = high speed with vertical oscillation
If the fan is working the blue LED light ring will be on; if the fan is off, the blue
LED light ring will be off.
When the fan is not used disconnect it from the electrical supply.
The fan should be cleaned periodically (at least once a month depending on the build-up of dust).
Clean the body of the pedestal fan with a soft damp cloth. Always make sure that the appliance is completely
dry before connecting back to the mains supply.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the pedestal fan.
NEVERuse ALCOHOLORSOLVENTS.
Remove the front guard and take out the fan blades. Wash under water, rinse & dry. Replace fan blades
and frontguard. Donot disassemble the fan inany other manner.
STORAGE: Store the pedestal fan with these instructions, in a cool, dry place with a cover over it.
8
HOW TO USE
Reference dot
CLEANING & MAINTENANCE
WARNING:
ALWAYS UNPLUG THE CORD BEFORE MOVING OR CLEANING, DO
NOT