OPERATION, MAINTENANCE AND SAFETY INSTRUCTIONS FOR OMEGA ALTISE PEDESTAL FAN MODEL: OP46BC
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......................................................................................................................1 PRODUCT OVERVIEW .............................................................................................................................................2 ASSEMBLY ...............................................................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage.
PRODUCT OVERVIEW Model: Rated Voltage: Rated Power Input: 1. 2. 3. 4. 5. 6. Front guard Fan blade Fan blade screw Cover fixing screws Rear guard Motor shaft 7. 8. 9. 10. 11. 12. OP46BC 220 – 240V ~50Hz 60W Speed control Fan motor Mains lead Knob Inner tube Height adjustment screw 13. 14. 15. 16. 17. Outer tube Base Weight Fastener Locking screw ASSEMBLY 1. Assemble the base. 2. Insert the outer tube into the base, slide on the weight and secure using the locking screw. Place the assembly upright. 3.
OPERATING INSTRUCTIONS Connect the power plug to a suitable outlet. Select the desired speed using the Speed control: 0 – Device Off 1 – Low speed 2 – Medium speed 3 – High speed The incline of the fan head can be adjusted by tilting it backwards or forwards. The fan head can then be locked into position, which is indicated by an audible click. To adjust the height, loosen the height adjustment screw, slide the upper section to the required height and retighten the adjustment screw.
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Omega Altise reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available. A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 795 572 In New Zealand: (09) 415 6000 www.omegaaltise.
