OPERATION, MAINTENANCE AND SAFETY INSTRUCTIONS FOR OMEGA ALTISE TOWER FAN MODELS INCLUDE: OT803MW OMEGA ALTISE
IMPORTANT SAFETY INSTRUCTIONS 2 IMPORTANT: Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage.
TECHNICAL DETAILS Model: OT803MW Tower fan with mechanical timer. Power: 220-240V 50Hz, 40W. Weight: 2.4kg. Dimensions (HxWxD): 800x225x225mm GENERAL TOWER FAN PARTS Control panel Handle Washable mesh filter Air outlet Air inlet Non-removable rear cover Base Power cord FRONT REAR GETTING STARTED 1. Carefully remove the appliance from the plastic bag and the carton, and unwind the cord to its full length. 2.
CONTROLS CONTROL KNOBS: There are 2 control knobs at the top of the tower fan. A) The rear knob is used to control the fan speed. There are 3 fan speeds available (LOW, MID & HIGH). Rotate the control knob to the right hand to run the fan without oscillation. Rotate the control knob to the left hand side to run the fan with oscillation. Rotate the control knob to the top or bottom to turn the fan off. B) The front control knob is a mechanical timer (a maximum setting of 2 hours).
