Specification Sheet

REVISED – March 24, 2006 submitom-SS.doc (2/19/07)

FRESH AIR INLET ASSEMBLY

 PVC and Aluminum Construction

 Weather Proof

 Inlet Flex & Clamps Included

 Corrosion Resistant

SPECIFICATIONS

CRC Part No.:

0314.00 – Fresh Air Inlet, Flex & Clamps

(Wt. – 1.5 Lbs., 0.68 kg)

Dimensions:

4.0” (101mm) OD on Inlet Hood

24” (609mm) Long PVC Coated Aluminum Flex &

Clamps

Temperature Rating:

Min. –40°F (-40°C)

Max. 200°F (93°C)

INSTALLATION & CHECKOUT

INSTALLATION:

Install fresh air assembly as shown on shop drawing.

Apply silicone sealer to external surface that mounts

against wall. Secure to wall with three screws. Refer

to the owner's manual for installation guidance.

Checkout

Make sure that the fresh air assembly and flex is

installed in accordance with the owner’s manual as

well as the shop drawing. Inspect to make sure flex is

securely fastened with clamps provided.

COMBUSTION

RESEARCH

CORPORATION

Part No. 0314.00, Fresh Air Inlet

ssembly

4” Fresh Air Inlet, Flex & Clamps