Specification Sheet

REVISED – March 25, 2006 submitom.doc (9/23/03)
ELBOW PACKAGE
 Bright Finish Stainless Steel Reflector Material
 0306.AS Aluminized Steel Radiant Tube Elbow
 Horizontal Reflector Mounting Configuration
 Used With Omega II
®
Radiant Tube System
 Corrosion Resistant
SPECIFICATIONS
CRC Part No.:
0306.P1.SS - 3.5” diameter
Wt. 4.0 lbs. (1.81 kg)
Dimensions:
Minimum 0.025” Thick Bright 304 Stainless
Steel, Minimum 18 Ga. aluminized steel
radiant tube elbow.
INSTALLATION & CHECKOUT
INSTALLATION
Install radiant tube elbow and reflector elbow as
shown on shop drawing. Note, secure tube elbow to
radiant tubes with self drilling and taping screws and
secure reflector elbow to the adjacent reflectors with
the self drilling and tapping sheet metal screws - Refer
to the owner's manual for installation guidance.
Checkout
Make sure that the radiant tube elbows and reflector
elbows are installed in accordance with the owner’s
manual as well as the shop drawing. Inspect to make
sure that all radiant tubes are connected square and
straight.
COMBUSTION
RESEARCH
CORPORATION
Part No. 0306.P1.SS, Elbow Package
SS Reflector Elbow & 3.5”, 90° Tube Elbow