Specification Sheet

REVISED – March 25, 2006 submitom.doc (9/23/03)
HEAT TREATED ALUMINIZED 409
STAINLESS STEEL COMBUSTION TUBE
 Aluminized 409 StainlessSteel Construction –
Heat treated
 Used With Omega II
®
Radiant Tube System
 Corrosion Resistant
SPECIFICATIONS
CRC Part No.:
0404.SS.16.HT - 4” diameter radiant tube
Wt. – 26.0 lbs. (11.8 kg)
0304.SS.16.HT - 3.5” diameter radiant tube
Wt. – 23.5 lbs. (10.6 kg)
Dimensions:
Minimum 16 Ga. heat treated aluminized 409
stainless steel, 3.5” or 4.0" Tubing
Temperature Rating:
1050°F (565°C)
INSTALLATION & CHECKOUT
Installation
Install 16 Ga. burner combustion tube immediately
down stream of burner. Note one end is swaged to fit
inside the next radiant tube. Position weld seam so
that it is on the bottom. Secure radiant tubes burner
assembly with 0507.00 (3.5”) or 0403.00 (4.0”)
stainless steel drawband couplers. Refer to the
owner's manual for installation guidance.
Checkout
Make sure that the weld seam is positioned on the
bottom of the tube. Inspect to make sure that all
radiant tubes are connected square and straight.
COMBUSTION
RESEARCH
CORPORATION
Burner Combustion Tube
16 Ga. Heat Treated Aluminized 409 StainlessSteel