The MERLIN Magic Massage system for vehicles INSTALLATION INSTRUCTIONS COPYRIGHT: ONEGA RESEARCH & DELVE OP RENT 2060 OMEGA RESEARCH & DEVELOPMENT FCC ID: Lona9433 JOB #: 6dz170 EXHIBITS: 34. #7.
Overview of the MERLIN Magic Massage The Omega Merlin Magic Massage adds massage-like vibrating operation to the driver's seal.
Step 1 Start by protecting interior areas, such as be see! Bolton, which need not be accessed with a clean drop cloth, Begin this step with an inspection of the Interior; any damage or blemishes should be brought to the customer's initiation at this time to avoid potential misunderstandings that the damage devoured during or as a result of the installation. Step 2 ~ Remove any hardware attached the seal back which will prevent the seal coverings removal.
installing the MERLIN kit ® The cavity dimensions needed for the transducer marmots arg Joo x 8m x 2.8m. This booklet includes a template inside the back cover. The exp ditto installer In Figure 7 has made his own specific templates which ensures optimum transducer mounting for each type of vehicle » while pols saving valuable install nation Hume.
Step 5 Route the wires fo the rear of the seat back, en carefully spray adhesive into each cavity and surrounding area, and spray the transducers as shown. Exercise caution end control to Emit spraying the glue 1 the needed areas only. When spraying the transducers, avoid spraying glue into the open transducer and Lie a quality inferior grade spray adhesive to ensure that the ans. dupers are firmly fastened into Bre padding cavities.
Step B Now test the Medina's functions. Refer to the operating instruction card for complete operations description. However, the purpose of this quick operational testis to ensure hud elt transducer ers are operational and that the transducers are plugged bile the processing and control module correctly. To last, position the satin order to test the zanies properly, and thee 1 Press the garrote corral unit's POWER button; Media should heap once and start the vibrating action 2.
This device complies with FOO Rules part 15. Operation is subject to the following wv conditions, (13 This device ay nof defeat harmful interference aid, {2) This device past accept any interference that say be advanced, including interference that way use undesired operation The manufacturer i not responsible for sey radio or TV intervenes caused by authorized modifications to this equipment.
