- Omega Handheld Infrared Thermometer User's Guide

TABLE OF
CONTENTS
Page
Unpacking Instructions i
Chapter 1 General Description 1-1
1.1 Introduction 1-1
1.2 Parts of the Thermometer 1-5
1.2.1 Front of the Thermometer 1-5
1.2.2 Rear of the Thermometer 1-7
Chapter 2 Using the Handheld Infrared Thermometer 2-1
2.1 How to Power the Thermometer 2-1
2.1.1 Battery Operation 2-1
2.1.2 AC Power Operation 2-1
2.2 Operating the Thermometer 2-2
2.2.1 Measurement Techniques 2-6
2.3 Real Time Mode (Active Operation) 2-8
2.3.1 Adjusting Emissivity 2-11
2.3.2 Using the LOCK Function 2-11
2.3.3 Using the Trigger Function 2-11
2.3.4 Using the Distance Function 2-12
2.3.5 Laser Sighting Status 2-15
2.3.6 Calculating Temperature Values 2-15
2.3.7 Changing the Temperature from °F to °C (or vice versa) 2-16
2.3.8 Turning on the Display Backlighting 2-16
2.3.9 Thermocouple Input (OS532E, OS533E, OS534E) 2-16
2.3.10 Using the Alarm Functions 2-17
2.3.11 Using Ambient Target Temperature Compensation 2-19
(OS533E, OS534E, OS523E, OS524E)
2.3.12 PC Interface Software (OS533E, OS534E, OS523E, OS524E) 2-20
2.3.13 PC Interface Commands 2-25
2.3.14 Storing Temperature Data on Command 2-27
(OS533E, OS534E, OS523E, OS524E)
2.3.15 Logging Temperature Data in Real Time 2-28
(OS533E, OS534E, OS523E, OS524E)
2.3.16 Erasing the Temperature Data from Memory 2-29
2.4 Recall Mode (Passive Operation) 2-30
2.4.1 Reviewing the Last Parameters 2-32
2.4.2 Reviewing Previously Stored Temperature Data 2-32
(OS534E, OS523E, OS524E)
Chapter 3 Laser Sighting 3-1
3.1 Warnings and Cautions 3-1
3.2 Description 3-2
3.3 Operating the Laser Sighting 3-3
3.4 Laser Sighting Status 3-3
Chapter 4 Sighting Scope 4-1
4.2 Installing and Operating the Sighting Scope 4-1
OS530E/OS520E Series
Handheld Infrared Thermometer
iii