- Omega Handheld Infrared Thermometer User's Guide

2-27
Using the Handheld Infrared Thermometer
2
2.3.14 Storing Temperature Data on Command
(OS534E, OS523E, OS524E)
The thermometer can store up to 800 temperature data
points on command. This data is stored in the non-volatile
memory, so removing the batteries will not affect or erase
this data. To store temperature data:
1. Aim at the target and pull the trigger and press the
key to lock the trigger. The icon will appear
on the display.
2. If necessary, press the key to increment the target
emissivity or press the key to decrement the target
emissivity.
3. Press and hold the key until the Memory Display
Mode (MEM) appears.
4. Press the key to store the target temperature at the
memory location indicated. You will hear a beep to
verify that the data is stored. Then the memory location is
incremented by one.
5. After all data is taken, press and hold the key
until the Emissivity Display Mode (E) appears.
6. Press the key to unlock the trigger or pull the
trigger twice at any time.
LOCK
FUNC
LOCK
FUNC
F
C
LOCK
°F