- Omega Industrial Infrared Thermometer/Transmitter User's Guide

Using the Infrared Thermometer/Transmitter

3-18

Figure 3-10. Serial Printer Hookup

3. With power applied to the unit, press and hold the key

until the Print Data Display Mode (PRN) appears.

4. Press the key to increment the printing interval.

Press the key to decrement the printing interval. The printing

interval (from 1 to 1999 seconds) is the time between data points.

The default value is 2 seconds.

5. Press the key to start sending data. The icon

appears on the display.

To stop sending data, press the key again, and the

icon disappears.

RS-232

Digital

Cable

25-Pin 'D'

Connector

6-Pin

Phone Jack

To t he

Printer

To the

Pyrometer

Serial Printer

NOTE

Bottom hole is

the RS-232 jack

°F

PRN

NOTE