Installation Manual

Tapered
Sleeves
Post
Shelf
Collar
Tapered
Sleeve
CAUTION: INSPECT CONTENTS IMMEDIATELY TO ENSURE PRODUCT
WAS NOT DAMAGED DURING SHIPPING.
Note: Please dispose of loose, round pieces. These are used to separate the
shelves for shipping purposes.
Step 1 Unpack carton, identify and confirm quality of components.
Step 2 Before assembly of shelving unit to Truck Dolly, unscrew the leveling
feet from the posts (See Diagram 1).
Step 3 Attach the posts to Truck Dolly frame, using leveling feet and
washers and tighten down (See Diagram 2).
Step 4 Assembly shelving unit with at least 3 shelves. Snap two (2) tapered
sleeves, with the word UP on top, at the same height on each post.
(See Diagram 3). Attach shelf, making sure the wider portion of the
round shelf collars are facing down. Repeat step until all shelves are
attached at their desired heights. (Note: A rubber mallet may be used
to tap each corner of the shelves so they are firmly installed onto the
tapered sleeves.)
WARNING: HEAVY OBJECTS MUST BE PLACED – NOT DROPPED – ONTO THE SHELVES!!
IN DEMANDING USE SITUATIONS AND WHERE THRESHOLDS ARE CONTINUALLY ENCOUNTERED. FOCUS RECOMMENDS
THE USE OF STAKED POSTS AND ALUMINUM SPLIT SLEEVES.
Wire Shelving with Aluminum Truck Dolly
DIAGRAM 1 DIAGRAM 2
DIAGRAM 3
www.precisiontools.com
Call Customer Service at 1-800-221-8665 | Fax [phone]
INSTRUCTIONS
ASSEMBLY