Product Manual

ManualsBrandsOmega ManualsAutomotive20-Ton Low Profile Air Actuated Bottle Jack

Air/ Manual Hydraulic Bottle Jacks

Model

18122C

18202C

18209

(Low Prole)

18302C

Printed in China

18122C-M2 rev 11/08

Operating Instructions & Parts Manual

Capacity

12 Ton

20 Ton

30 Ton

Model 18122C, 18202C & 18209

Model 18302C

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

! ADVERTENCIA

• Leer, comprender, y seguir las instrucciónes antes

de utilizar el aparato.

• El manual de instrucciónes y la información de

seguridad deben estar comunicado en lengua del

operador antes del uso.

• No seguir estas indicaciónes puede causar daños

personales o materiales.

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

SFA Companies

http://www.omegalift.com

! WARNING

To avoid crushing and related injuries:

•

NEVER work on, under or around

a load supported only by a hydraulic

jack.

•

ALWAYS use adequately rated jack

stands.

U.S. Patent Nos. 5,341,723 - 5,946,912

Summary of content (8 pages)

PAGE 1
Operating Instructions & Parts Manual Air/ Manual Hydraulic Bottle Jacks Model 18122C 18202C 18209 (Low Profile) 18302C Model 18122C, 18202C & 18209 Capacity 12 Ton 20 Ton 20 Ton 30 Ton Model 18302C U.S. Patent Nos. 5,341,723 - 5,946,912 ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
PAGE 2
SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge.
PAGE 3
! WARNING ! WARNING X • Study, understand, and follow all printed materials provided with/on this product before use. • Do not exceed rated capacity. • This is a lifting device only! • Immediately after lifting, support the load with a pair of appropriately rated jack stands. • Use only on hard, level surface. • Do not use adapters or accessories that are not provided initially. • Lift only on areas of the vehicle as specified by the vehicle manufacturer.
PAGE 4
OPERATION MAINTENANCE Raising the Ram Plunger 1. Assemble handle, ensure that spring clips align with slots. 2. Place vehicle in the park, with emergency brake on and wheel securely chocked to prevent inadvertent vehicle movement. 3. Locate and close release valve by turning handle clockwise until firm resistance is felt to further thread engagement. 4. Verify lift point, center jack saddle under lift point. 5.
PAGE 5
TROUBLESHOOTING Symptom Possible Causes Corrective Action Jack will not lift load • Release valve not tightly closed • Overload condition • Air pressure inadequate • Ensure release valve tightly closed • Remedy overload condition • Ensure adequate air pressure Jack will lift, but not maintain pressure • Release valve not tightly closed • Overload condition • Hydraulic unit malfunction • Ensure release valve tightly closed • Remedy overload condition • Contact Omega Tech.
PAGE 6
REPLACEMENT PARTS (refer to page 6 thru 8) Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Call or write for current pricing: SFA Companies Inc. 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(888) 332-6419 Fax:(816) 891-6599 E-Mail: sales@omegalift.com Omega Website: http://www.omegalift.
PAGE 7
Replacement Parts List for Models 18122C, 18202C & 18209 Item Part# for 18122C Part# for 18202C Part# for 18209 1 A120-10004-000 A190-10002-000 Cylinder Fastener 1 2 A120-10003-000 A190-10001-000 Guide Ring 1 3a 5905-00100-200 N/A Filler Plug 1 3b N/A G62S-03301-000 Description Qty. Filler Screw 1 4 A120-10002-000 Special Washer 2 5 5905-00054-000 Seal 1 6 BT10-24001-000 Release Valve 1 7 5308-00095-000 Gasket 2 Air Motor 1 Air Inlet Swivel 1 Hose Assy.
PAGE 8
Replacement Parts Illustration and Parts List for Model 18302C Item Part# for 18302C 1 2 a 11 22 b 10 12 4 3 c 13 23 9 24 19 d 18 20 e 16 l 8 f k j i g B300-10003-000 5308-00380-000 B300-15000-000 G62S-03301-000 B120-10003-000 5905-00054-000 BT02-17100-000 G100-44000-000 A27010-0001 A27010-0002 A20060-0005 A20060-0006 A20060-0007 B300-14002-000 B300-14001-000 B300-14101-000 G150-04500-000 5405-08030-000 B300-13000-000 5405-02018-000 B300-17000-000 A27010-0011 A20060-0016 A270-01100-0000 B30