Operating Instructions & Parts Manual MagicLift™ Low Profile Garage Jack Model: 29023 ! Capacity: 2 Ton This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. SFA Companies http://www.omegalift.com Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and/or operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and/or operator shall be aware that the use and repair of this product may require special skills and knowledge.
PREPARATION (refer to Fig 1 ! WARNING & 2) Before Use 1. Verify that the product and the application are compatible, if in doubt call Omega Technical Service (888) 332-6419. 2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use. 3. Insert the handle into handle fork. Tighten the bolt on handle fork to prevent accidental removal of handle while in use. 4.
OPERATING INSTRUCTIONS CARE AND MAINTENANCE Lifting Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and Never use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent. ! Only attachments and/or adapters supplied by the manufacturer shall be used.
TROUBLESHOOTING Symptom Possible Causes Corrective Action Jack will not lift load • Release valve not tightly closed • Load is too heavy • Ensure release valve tightly closed • Consider higher capacity jack Jack will lift, but not maintain pressure • Release valve not tightly closed • Overload condition • Hydraulic unit malfunction • Ensure release valve tightly closed • Remedy overload condition • Discontinue use, contact Omega Technical Service Jack will not lower after unloading • Reservoir ove
REPLACEMENT PARTS (refer to page 6 & 7) Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Call or write for current pricing: SFA Companies, 10939 N. Pomona Ave. Kansas City, MO 64153, USA. Tel: (888) 332-6419 Fax: (816) 891-6599 E-Mail: sales@omegalift.com Omega Website: http://www.omegalift.
Replacement Parts List for model 29023 Item# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 (*) - Part# G86301-0001 G86301-0017 G86301-0016 G86301-0004 G86301-0003 G86301-0008 G86301-0019 G86301-0018 G48900-0024 G86301-0021 G86301-0014 G86301-0012 G86301-0013 G86301-0023 G86301-0024 G88009-0016 G59509-0014 G59509-0015 G59305-0006 G73500-0011 G73500-0012 G59305-0005 G86301-0025 G86301-0020 G86301-0000 29023-L0 29023-M0 (*) Seal Kit 86301-0000 includes: Item a b c d e f g h i j k l m n o p
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.