Product Manual

SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
engine stand before using. The owner and/or operator of this equipment shall have an understanding of engine
stand and safe operating procedures before attempting to use. The owner and/or operator shall be aware that the
use and repair of this product may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator’s native language before use of this engine stand is authorized. If any doubt exists as to
the safe and proper use of this product, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
engine stand that appears damaged in any way, operates abnormally or is missing parts, shall be removed from
service immediately. If you suspect that the engine stand was subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use until it has been checked by a factory authorized service center
(contact distributor or manufacturer for list of authorized service centers). It is recommended that an annual inspection
be done by qualied personnel. Labels and owner’s manuals are available from manufacturer.
PRODUCT DESCRIPTION
This Engine Stand is designed to safely support a rated capacity engine during that time that the engine is being rebuilt
or repaired.
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
!
2
SPECIFICATIONS
Model Capacity
Base Size
(L x W)
Overall
Height
Head Plate
(L x H x Thickness)
Wheel
Diameter
30750 750 lb. 31-1/2" x 31-1/2" 36-3/4" 10" x 6" x 3/8" 3"
31250
1250 lb.
33-3/8" x 33-7/8" 42-3/4" (7-1/2" - 10-1/2") x 6-1/2" x 5/8"
3-1/2"
31252
41-3/4” X 23-5/8” 42-3/4” (7-1/2” - 10-1/2”) X 6-1/2” X 5/8”
31256