OPERATION, MAINTENANCE AND SAFETY INSTRUCTIONS FOR OMEGA ALTISE MISTING FAN MODELS INCLUDE: AM360R OMEGA ALTISE
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage.
GENERAL MISTING FAN PARTS 1. LED Display 2. Control Buttons 3. Control Panel 4. Air Guide wheel 5. Misting Plate 6. Front Cover 7. Water Level Indicator 8. Panel Bracket 9. Back cover 10. Back guard 11. Water tank 12. Drain cover 13. Power Cord 14. Castors TECHNICAL DATA Model: AM360R. Voltage: 220-240V 50Hz. Power Ratings: 90W (Misting – 32W). Size: 400*290*800mm. Weight: 6.5kg. Diameter of fan blades: 360mm. Maximum water usage: 130mL/hr. Water tank capacity: 2.5L. GETTING STARTED 1.
CONTROLS FUNCTION BUTTONS: CONTROL PANEL ON FRONT OF BODY REMOTE CONTROL There are 6 function buttons on the control panel at the front of the main body and on the remote control. Make sure the power has been connected (indicator 6 will light up to indicate this) and the water tank has been filled. 1) Off button (9): This button turns the fan off when pressed. The Fan Function icon will turn off. 2) On/Speed button (10): When connected to the power supply, the “Power on” indicator (6) will light up.
FILLING THE WATER TANK Always fill the water tank fully before using the mist function. After use, empty (and clean if necessary) the water tank. Remove the appliance from the power source. Take the tank out of the rear mounting, unscrew the plug and fill with cool (or cold) water. Screw the cap securely back onto the tank and fit the tank back into its position at the rear of the misting fan. Make sure the plug is placed correctly in its mounting, otherwise the water will not flow.
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Omega Altise reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.
OMEGA ALTISE
A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 795 572 In New Zealand: (09) 415 6000 www.omegaaltise.
