Use and Care Manual

TROUBLESHOOTING
Problem Solution
1. Blender fails to start.
1. Place container properly on the base
2. Check to ensure controls are clean
and moving freely.
3. Double-check to ensure power cord is
securely plugged into the electric outlet.
4. Check to see if the circuit breaker has
tripped or if the fuse for the electric out-
let has blown.
2. Stopped
1. Unplug blender and wait 5 minutes.
Plug the blender back in and resume op-
eration.
3. Ingredients do not mix properly
1. Container is too full.
2. Cutter unit blades are not sharp
enough or are damaged.
3. Solid pieces are bigger than 1"
(25mm) cubes.
4. Check the speed to create a fluid
blend.
5. Check to see if enough liquid has
been added to the ingredients. Mixture
should be fluid and free-running at all
times.