user guide sensor CNiS8, CNiS8C, CNiS8DH, CNiS8DV, CNiS16, CNiS16D, CNiS32

59
Linearization Points
Up to 10 Linearization Points
Configuration
Single-ended
Polarity
Unipolar
Step Response
0.7 sec for 99.9%
Decimal Selection
None, 0.1, 0.01 or 0.001
Setpoint Adjustment
-1999 to 9999 counts
Span Adjustment
0.001 to 9999 counts
Offset Adjustment
-1999 to +9999
CONTROL
Action
Reverse or direct
Modes
Time and Amplitude Proportional
Control Modes; selectable Manual or
Auto PID, Proportional, Proportional
with Integral, Proportional with
Derivative with Anti-reset Windup and
ON/OFF
Rate
0 to 399.9 seconds
Reset
0 to 3999 seconds
PART 4
SPECIFICATIONS
Accuracy 0.03% reading
Resolution 10 / 1 µV
Temperature Stability 50 ppm/°C
NMRR 60 dB
CMRR 120 dB
A/D Conversion Dual slope
Reading Rate
3 samples per second
Digital Filter
Programmable
Display
4-digit, 9-segment LED
•
10.2 mm (0.40"): iS32, iS16, iS16D
(DualDisplay),
iS8DV (Dual Vertical)
• 21 mm (0.83"): iS8
• 10.2 mm (0.40”) and 21 mm (0.83”):
iS8DH (Dual Horizontal)
red, green and amber programmable
colors for process variable, set point
Warm up to Rated Accuracy
30 min.
INPUT
Input Types
Analog Voltage, Analog Current
Voltage Input
0 to 100 mV
0 to 1 V (+
100 mV),
0 to 10 Vdc
Input Impedance:
10 MΩ for 100 mV
1 MΩ for 1 V or 10 Vdc
Current Input
0 to 20 mA (5 ohm load)