Owner's manual

7
2.3 Parts of the iServer Unit
Figure 2.5 Parts of the iServer Unit
Table 2.1 Parts of iServer Unit
SERIAL DB9 male (DTE Configuration) or 2, four position connectors
for RS232 / RS485 connections
ETHERNET RJ45 interface for 10BASE-T connection.
RESET Button: Used for power reseting the iServer.
ACTIVITY LED (Red) Blinking: Indicates network activities (receiving or sending packets).
NET LINK LED (Green) Solid: Indicates good network link.
TX LED (Yellow) Blinking: Indicates transmitting data to the serial port.
RX LED (Green) Blinking: Indicates receiving data on the serial port.
POWER LED (Green) Solid: Indicates Power-ON.
DC Power Supply Section:
+ Plus power supply wire connection (inside the plug for -W).
- Minus power supply wire connection (outside the plug for -W).
ACTIVITY
NETWORK LINK
TX-TRANSMIT
RX-RECEIVE
RS-232 / RS-485
SERIAL
RX TX LINK ACT
Mounting Bracket