Owner's manual

PART 5 SPECIFICATIONS
Serial Interface
Interface: RS232 or RS485 (2-wire)
Connector: DB9 (male DTE) for Wall Mount;
8 position Terminal Block plugs for DIN Rail
Serial Data Rates: 300 to 115,200 bps
Characters: 7 or 8 data bits
Parity: odd, even, or none
Stop Bits: 1 or 2
Flow Control: Hardware (CTS/RTS) and Software (Xon/Xoff)
Digital I/O’s 4 digital input/output lines
Network Interface
Interface: Ethernet 10BASE-T
Connector: RJ45
Protocols: TCP/IP, UDP/IP, ARP, ICMP, DHCP, DNS, HTTP, Telnet
simulation, and Modbus TCP/IP
Compliant to Standard: IEEE 802.3
Indicators (LED’s): Network Activity (red), Network Link (green), TX-Transmit
(yellow), RX-Receive (green); Power (green)
Processor CPU: Enhanced 8051, 22 MHz
Processor Memory: 512 Kbyte Flash, 16 Kbyte SRAM
Embedded Web Server: Serves dynamic Web pages and Java applets (256 Kbyte
capacity)
Management: Device configuration and monitoring through embedded
Web server, Telnet login, Serial login, iConnect
General
Power Input (for EIS-W): 9 to 12 Vdc
Consumption: 2.5 W max.
Safety Qualified ac Power Adapter (included):
Nominal Output: 9 Vdc @ 0.5 A
Input: 100 to 240 Vac, 50/60 Hz
Operating Temp: 0 to 40°C (32 to 104°F)
Power Input (for EIS-2B): 10 to 32 Vdc
Consumption: 2 W max
(DC Power supply sold separately: iDRN-PS-1000)
Operating Temperature: 0 to 70°C (32 to 158°F)
Storage Temperature: -40 to 125°C (-40 to 257°F)
UL Safety Tested: 0 to 50°C (32 to 122°F)
Agency Approvals FCC-B, UL, C/UL, CE
Software: Firmware upgradeable; COM Port Redirector (iPort);
Configuration software (iConnect)
49