Owner's manual

Part Number Description Qty.

901002-52 O-ring ............................................................................................ 1

125501-1 Circuit Assembly Kit (10 pin connector) ..................................... 1

904005-27 Screws ........................................................................................... 6

PARTS LIST

Call OMEGA Sales Department and reference base part number (FLSC790-MA) to order

spare parts.

Symptom Probable Cause Corrective Action

No output signal 1. Incorrect or no input power Supply correct power requirements.

2. Not wired correctly Check owner’s manual for correct installation.

3. Broken connection Check resistance to determine location of

break.

4. Defective PC board connector Contact distributor or factory for replacement.

5. Defective unit Contact distributor or factory for replacement.

Signal does rise 1. Zero trimpot not set correctly Reinitiate Zero & Span adjustments - careful

above 4 mA to increase Zero read above 4 and then turn

back to 4 mA reading to avoid false 4 mA

signal.

2. No signal from meter See Turbine and Display Electronics owner’s

manual.

TROUBLESHOOTING