User’sGuide omega.com ® ® http://www.omega.com e-mail: info@omega.
omega.com omega.com ® ® ® OMEGAnet® On-Line Service http://www.omega.com Internet e-mail info@omega.com Servicing North America: USA: ISO 9001 Certified Canada: One Omega Drive, Box 4047 Stamford, CT 06907-0047 Tel: (203) 359-1660 e-mail: info@omega.com 976 Bergar Laval (Quebec) H7L 5A1 Tel: (514) 856-6928 e-mail: info@omega.
TABLE OF CONTENTS + Introduction ................................................ 1 Installation and Wiring .............................. 1 Technical Specifications ............................ 2 Typical Wiring ............................................ 3 Warranty/Disclaimer .................................. 5 Return Requests/Inquiries .......................... 5 INTRODUCTION Caution: This Pulse Output Module is not FM Approved.
9. Install the back coverplate. Make sure the O-ring is securely seated and no wires are pinched. 10. Connect to the user interface device according to manufacturer’s instructions. 11. Refer to the etched K-factor on the turbine. See Turbine Manual for location of K-factor. NOTE: Please remember to supply a 820 ohm (minimum) Pull Up Resistor if the interface device does not have one. Reference illustration above as necessary.
TYPICAL WIRING Wiring to DPF700 Series Panel Meter For connecting to the DPF700 meter, attach the white wire to Pin 2 on TB2, “SIG IN”. The black wire goes to Pin 3 on TB2, “SIG GND”. Set the S1 switches for 12.4 VDC OUT. No connection is made to “EXCITATION OUT”; the white wire is pulled up to the 12.4 VDC excitation inside of the DPF700.
NOTES 4
MADE IN USA WARRANTY / DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product. If the unit malfunctions, it must be returned to the factory for evaluation.
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA… Of Course! TEMPERATURE ✓ Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies ✓ Wire: Thermocouple, RTD & Thermistor ✓ Calibrators & Ice Point References ✓ Recorders, Controllers & Process Monitors ✓ Infrared Pyrometers PRESSURE, STRAIN AND FORCE ✓ Transducers & Strain Gauges ✓ Load Cells & Pressure Gauges ✓ Displacement Transducers ✓ Instrumentation & Accessories FLOW/LEVEL ✓ Rotameters, Gas Mass Flowmeters & Fl
