Products, Inc Automobile Parts User Manual

TABLE IV PRESSURE DROPS
TABLE V APPROXIMATE WEIGHTS
5. OPERATING INSTRUCTIONS
5.1 Preparation and Warm Up
It is assumed that the Mass Flow Meter or Controller has been correctly installed
and thoroughly leak tested as described in section 2. Make sure the flow source
is OFF. Power up the transducer using your own power supply (or turn the
POWER switch to the ON position at the front panel of your FMA14PD Series
Command Module). Allow the Mass Flow Meter or Controller to warm-up for a
minimum of 15 minutes.
9
MODEL WEIGHT SHIPPING WEIGHT
FMA 1500 ranges up to 10 L/min transmitter 1.71 lbs (0.78 kg) 3.21 lbs (1.46 kg)
FMA 1500 ranges above 10 L/min transmitter 2.42 lbs (1.10 kg) 3.92 lbs (1.78 kg)
FMA 1400 ranges up to 10 L/min transmitter 2.20 lbs (1.00 kg) 3.70 lbs (1.68 kg)
FMA 1400 ranges above 10 L/min transmitter 2.84 lbs (1.29 kg) 4.34 lbs (1.97 kg)
MODEL
FLOW RATE
[std liters/min]
MAXIMUM PRESSURE DROP
[mm H
2
O]
[psid] [mbar]
FMA 1500
up to 10 25 0.04 2.5
15 63 0.09 6.4
20 300 0.44 30
30 800 1.18 81
40 1480 2.18 150
50 2200 3.23 223
60 3100 4.56 314
80 4422 6.50 448
100 5500 8.08 557
FMA 1400
up to 10
720 1.06 75
15 2630 3.87 266
20 1360 2.00 138
30 2380 3.50 241
40 3740 5.50 379
50 5440 8.00 551
60 7480 11.00 758
80 10204 15.00 1034
100 12850 18.89 1302