User's Manual

DANGER, WARNING, CAUTION and NOTE statements
Refers to conditions or hazards which could result in serious personal injury or death.
Refers to conditions or hazards which could result in personal injury.
Refers to conditions or hazards which could result in equipment or property damage.
Alerts you to facts or special instructions.
ALL DANGER, WARNING, AND CAUTION NOTICES MUST BE COMPLIED WITH IN FULL
SPECIFICATIONS
Functional Specifications
Standard Range High Output Range
Inputs 4-20 mA
Outputs
psig 1-17 3-15 3-27 6-30 2- 60 2-100
(BAR) (0.07-1.2) (0.2-1.0) (0.2-1.8) (0.4-2.0) (0.14-4.0) (0.14-6.9)
Supply
Pressure
psig
22-60 20-100 32-100 35-100 65-100 105-130
(BAR)
(1.5-4.0) (1.4-6.9) (2.2-6.9) (2.4-6.9) (4.5-6.9) (7.2-9.0)
Air Consumption
1.5 scfh (0.04 m3/hr) at 4.5 scfh (0.13 m3/hr) at
*Zero-based units have
mid range typical mid range typical
slightly higher air consumption
Flow Capacity 4.5 scfm (7.6 m3/hr) at 20.0 scfm (34.0 m3/hr) at
25 psig (1.7 BAR) supply 130 psig (9.0 BAR) supply
12.0 scfm (20.0 m3/hr) at
100 psig (7.0 BAR) supply
Temperature Limits Operating: -40º to +160º F (-40º to +71º C)
Storage: -40º to +200º F (-40º to +93º C)
Loop Load,
I/P Transducer 9.5 VDC @ 20 mA
Performance Specifications
Accuracy, Hysteresis
and Repeatability ±0.10% of span guaranteed
Deadband 0.02% of span
Position Effect No measurable effect
Vibration Effect Less than ±1.0% of span under the following conditions:
5-15Hz @ 0.8 inches constant displacement 15-500Hz @ 10g s
Supply Pressure Effect No measurable effect
Temperature Effect ±0.045%/F (0.07%/C) of span
Reverse Polarity Effect No damage occurs from reversal of normal supply current (4-20mA)
or from misapplication of up to 60mA
RFI/EMI Ef fect Pending
Physical Specifications
Port Sizes Pneumatic: 1/4” NPT
Media Clean, dry, oil-free air-filtered to 40 micr on
Mounting Wall, panel, 2” pipe, or DIN rail (optional)
Materials Housing: Chromate-tr eated aluminum with baked paint, NEMA 4X (IP65)
Elastomers: Buna-N
Trim: Stainless steel; brass; zinc-plated steel
Weight 13.0 oz. (0.4 kg)
NOTE
CAUTION
WARNING
DANGER
Page 2